Update 08-01-2020
2019-OSU
A state-of-the-art review on solid-state metal joining
Cai, Wayne, Glenn Daehn, Anupam Vivek, Jingjing Li, Haris Khan, Rajiv S. Mishra, and Mageshwari Komarasamy
In: Journal of Manufacturing Science and Engineering 141, no. 3 (2019): 031012
2019-OSU
Microstructural Investigation of the Impact Weld Interface of Pseudo Single Grained Cu and Ag
Lee, Taeseon, Menglin Zhu, Taylor Dittrich, Jinwoo Hwang, Anupam Vivek, and Glenn S. Daehn
In: Metallurgical and Materials Transactions A (2019): 1-4
2019-OSU
Impact welding of ultra-high-strength stainless steel in wrought vs. additively manufactured forms
Liu, Bert C., Anthony Palazotto, Anupam Vivek, and Glenn S. Daehn
In: The International Journal of Advanced Manufacturing Technology 104, no. 9-12 (2019): 4593-4604
2019-IWS/IUL
Effect of the Forming Behavior on the Impact Flash during Magnetic Pulse Welding of Tubes
Bellmann J., Ueberschär F., Lueg-Althoff J., Schulze S., Hahn M., Beyer E., Tekkaya A. E.
In: Korkolis, Y. P. et al. (Eds.): 13th International Conference on Numerical Methods in Industrial Forming Processes, Proceedings of NUMIFORM 2019. Portsmouth (New Hampshire), 2019.
2019-IWS/IUL
Magnetic pulse welding of tubular parts
Bellmann J., Lueg-Althoff J., Schulze S., Hahn M., Gies S., Beyer E., Tekkaya A. E.
In: Galdos, L. et al. (Eds.), ESAFORM Conference on Material Forming, Proceedings of the ESAFORM 2019. Vitoria-Gasteiz, Spain, 2019: AIP Publishing (AIP Conference Proceedings), p. 50015. DOI:10.1063/1.5112579.
2019-IWS/IUL
Thermal Effects in Dissimilar Magnetic Pulse Welding
Bellmann J., Lueg-Althoff J., Schulze S., Hahn M., Gies S., Beyer E., Tekkaya A. E.
In: Metals 9 (3), S. 348. DOI: 10.3390/met9030348
2019-IWS/IUL
Effect of the wall thickness on the forming behavior and welding result during magnetic pulse welding
Bellmann J., Lueg-Althoff J., Schulze S., Hahn M., Gies S., Beyer E., Tekkaya A. E.
In: Akzeptiertes Manuskript Material Science and Engineering Technology (ID: mawe.201900024)
2019-IWS/IUL
Experimental study on the magnetic pulse welding process of large aluminum tubes on steel rods
Bellmann J., Schettler S., Dittrich S., Lueg-Althoff J., Schulze S., Hahn M., Beyer E., Tekkaya A. E.
In: IOP Conference Series: Materials Science and Engineering 480, S. 12033.
2019-IUL
Fügen von Rohren durch elektromagnetische Umformung – Magnetpulsschweißen
Lueg-Althoff J.
In: Shaker, Herzogenrath
2018-OSU
Civilized explosive welding: Impact welding of thick aluminum to steel plates without explosives
Lee, Taeseon, Yu Mao, Richard Gerth, Anupam Vivek, and Glenn Daehn
In: Journal of Manufacturing Processes 36 (2018): 550-556
2018-OSU
Benchmarking strength and fatigue properties of spot impact welds
Kapil, Angshuman, Taeseon Lee, Anupam Vivek, John Bockbrader, Tim Abke, and Glenn Daehn
In: Journal of Materials Processing Technology 255 (2018): 219-233
2018-OSU
Dissimilar impact welding of 6111-T4, 5052-H32 aluminum alloys to 22MnB5, Dp980 steels and the structure–property relationship of a strongly bonded interface
Liu, Bert, Anupam Vivek, Michael Presley, and Glenn S. Daehn
In: Metallurgical and Materials Transactions A 49, no. 3 (2018): 899-907
2018-IWS/IUL
Influence of the flyer kinetics on magnetic pulse welding of tubes
Lueg-Althoff J., Bellmann J., Gies S., Schulze S., Tekkaya A. E., Beyer E.
In: Journal of Materials Processing Technology 262, 2018, pp. 189–203. DOI: https://doi.org/10.1016/j.jmatprotec.2018.06.005
2018-IWS/IUL
Parameter Identification for Magnetic Pulse Welding Applications
Bellmann J., Lueg-Althoff J., Schulze S., Gies S., Beyer E., Tekkaya A. E.
In: Key Engineering Materials 767, 2018, pp. 431–438. DOI: 10.4028/www.scientific.net/KEM.767.431.
2018-IWS/IUL
Effects of Reactive Interlayers in Magnetic Pulse Welding
Bellmann J., Lueg-Althoff J., Schulze S., Gies S., Beyer E., Tekkaya A. E.
In: Daehn, G. S., Tekkaya, A. E. (Eds.), High Speed Forming 2018,
Proceedings of the 8th International Conference, Columbus (Ohio), USA, 2018
2018-IWS/IUL
Influence of the Free Compression Stage on Magnetic Pulse Welding of Tubes
Bellmann J., Lueg-Althoff J., Schulze S., Gies S., Beyer E., Tekkaya, A. E.
In: Daehn, G. S., Tekkaya, A. E. (Eds.), High Speed Forming 2018,
Proceedings of the 8th International Conference, Columbus (Ohio), USA, 2018
2018-IWS/IUL
New possibilities for process control and higher efficiency at magnetic pulse welding
Bellmann J., Lueg-Althoff J., Schulze S., Gies S., Beyer E., Tekkaya, A. E., Dittrich, S.
At: International Symposium ‘Tailored Joining’, 27.-28.2.2018, Dresden
2017-IWU
Numerische und experimentelle Untersuchung von inkrementellen, elektromagnetischen Umformvorgängen
Linnemann M., Scheffler C., Kurka P., Psyk V., Landgrebe D.
In: Zeitschrift für wirtschaftlichen Fabrikbetrieb – ZWF, 112. Jahrgang, 7-8/2017, S. 454-458.
2017-IWS/IUL
Targeted Weld Seam Formation and Energy Reduction at Magnetic Pulse Welding (MPW)
Bellmann J., Lueg-Althoff J., Schettler S., Schulze S., Gies S., Beyer E., Tekkaya, A. E.
In: eBIS 2017 (5), pp. 91–102. DOI: 10.17729/ebis.2017.5/10, 2017
2017-IWU
Multi-physics modeling of composite materials for magnetic pulse welding tools
Vasiukova D., Cheng P., Scheffler C., Psyk V.
At: 3rd International Conference on Mechanics of Composites, MECHCOMP3, 4-7 July, 2017, Bologna.
2017-IWS/IUL
Neue Möglichkeiten zur Prozessüberwachung und Effizienzsteigerung beim Magnetpulsschweißen
Bellmann J., Lueg-Althoff J., Schulze S., Gies S., Beyer E., Tekkaya, A. E.
At: Werkstoffwoche2017. DGM. Dresden, 28.09.2017.
2017-IWU
Process analysis for magnetic pulse welding of similar and dissimilar material sheet metal joints
Psyk V., Scheffler C., Linnemann M., Landgrebe D.
At: International Conference on the Technology of Plasticity, ICTP 2017, 17-22 September 2017, Cambridge
2017-IWS/IUL
Measurement of Collision Conditions in Magnetic Pulse Welding Processes
Bellmann, J.; Lueg-Althoff, J.; Schulze, S.; Gies, S.; Beyer, E.; Tekkaya, A. E.
In: Journal of Physical Science and Application 7 (4), pp. 1–10. DOI: 10.17265/2159-5348/2017.04.001, 2017
2017-IWU/IFT
Principle and setup for characterization of material parameters for high speed forming and cutting
Tulke, M.; Scheffler, C.; Psyk, V.; Landgrebe, D.; Brosius, A.
At: International Conference on the Technology of Plasticity, ICTP 2017, 17-22 September 2017, Cambridge.
2017-IWU
Manufacturing of hybrid aluminum copper joints by electromagnetic pulse welding– an analysis of important process parameters
V. Psyk, C. Scheffler, M. Linnemann, D. Landgrebe
At: 20th International ESAFORM Conference on Material Forming – ESAFORM 2017, 26th – 28th April 2017, Dublin
2016-IWS/IUL
Influence of selected coatings on the welding result during magnetic pulse welding
Bellmann, J.; Lueg-Althoff, J.; Beyer, E.; Tekkaya, A. E.
At: International Symposium ‘Tailored Joining’, 23.-24.2.2016, Dresden
2016-IUL
Analytical prediction of Joule heat losses in electromagnetic forming coils
S. Gies, A. E. Tekkaya
In: Journal of Materials Processing Technology Link
2016-IWS/IUL
Measurement and analysis technologies for magnetic pulse welding: established methods and new strategies
J. Bellmann, J. Lueg-Althoff, S. Schulze,S. Gies, E. Beyer, A. E. Tekkaya
In: Advances in Manufacturing December 2016, Volume 4, Issue 4, pp 322–339 Link
2016-IWU
Process analysis for magnetic pulse welding of aluminium-copper joints
Psyk, V.; Linnemann, M.; Sheffler, C.; Landgrebe, D.
At: I2FG workshop on impulse metalworking 2016, 01.-02.12.2016, Nantes
2016-IWU
Magnetimpulsschweißen von Mischverbindungen
Psyk, V.; Linnemann, M.; Sheffler, C.; Landgrebe, D.
In: Maschinenmarkt 39/2016, S. 62-65 Link
2016-IWU
Prozessanalyse für das Magnetimpulsschweißen von Aluminium-Kupfer-Mischverbindungen
Psyk, V.; Linnemann, M.; Sheffler, C.; Landgrebe, D.
In: Sächsische Fachtagung Umformtechnik, 07.-08.12.16, Dresden, S. 174-183
2016-IWU/BWI
Effect of the welding parameters on the structural and mechanical properties of aluminium and copper sheet joints by electromagnetic pulse welding
Kwee,I.; Psyk, V.; Faes, K.
In: World Journal of Engineering and Technology, 4, 538-561 Link
2016-IUL/IWS
Effects of Surface Coatings on the Joint Formation During Magnetic Pulse Welding in Tube-to-Cylinder Configuration
Bellmann, J., Lueg-Althoff, J., Goebel, G., Gies, S., Beyer, E., Tekkaya, A.E.
In: Tekkaya, A.E., Kleiner, M. (Eds.), High Speed Forming 2016, Proceedings of the 7th International Conference, Dortmund, Germany, pp. 279–288.
2016-IWU
Influence of Different Strain Rates on the Flow Curve and the Formability of Thin Aluminium and Tinplate Sheets
Linnemann, M.; Lieber, T.; Scheffler, C.; Psyk, V.; Müller, R.; Landgrebe, D.
In: In: 7th International Conference on High Speed Forming – ICHSF 2016, Dortmund, 2016, pp. 245-255.
www.researchgate.net/publication/302496266
2016-IUL
Analytical approach for magnetic pulse welding of sheet connections.
M. Hahn, C. Weddeling, J. Lueg-Althoff, A.E. Tekkaya. In: Journal of Materials Processing Technology
www.sciencedirect.com/science/article/pii/S0924013615302077
2016-IUL/OSU
Vaporizing foil actuator welding as a competing technology to magnetic pulse welding.
M. Hahn, C. Weddeling, G. Taber, A. Vivek, G.S. Daehn, A.E. Tekkaya. In: Journal of Materials Processing Technology
www.sciencedirect.com/science/article/pii/S0924013615301977
2016-IUL/IWS
Workpiece positioning during magnetic pulse welding of aluminum steel joints.
A. Lorenz, J. Lueg-Althoff, J. Bellmann, G. Göbel, S. Gies, C. Weddeling, E. Beyer, E. Tekkaya. In: Welding Journal
s3.amazonaws.com/WJ-www.aws.org/supplement/WJ_2016_03_s101.pdf
2015-OSU
Impact Welding of Aluminum Alloys 6061 and 5052 by Vaporizing Foil Actuators: Heat-Affected Zone Size and Peel Strength.
S. R. Hansen, A. Vivek, and G. S. Daehn
In: Journal of Manufacturing Science and Engineering 137, no. 5 (2015)
2015-OSU
Solid state impact welding of BMG and copper by vaporizing foil actuator welding
A. Vivek, M. Presley, K. M. Flores, N. H. Hutchinson & G. S. Daehn
In: Materials Science and Engineering: A, 634, 14-19. (2015)
2015-OSU
Impact Welding of Aluminum Alloy 6061 to Dual Phase 780 Steel Using Vaporizing Foil Actuator
A. Vivek, B. Liu, D. Sakkinen, M. Harris & G. Daehn
In: SAE Technical Paper (No. 2015-01-0701) (2015)
2015-OSU
Use of Vaporizing Foil Actuator for Impact Welding of Aluminum Alloy Sheets with Steel and Magnesium Alloys
B. Liu, A. Vivek, & G. S. Daehn
In: TMS Light Metals Division, 463-468. (2015)
2015-OSU
Vaporizing Foil Actuator: a Tool for Creating High‐Pressure Impulses for Metalworking
A., Vivek, G. A., Taber, J. R. Johnson, & G. S. Daehn
In: 60 Excellent Inventions in Metal Forming (pp. 77-82). Springer Berlin Heidelberg. (2015)
2015-IWU
Optimisation of component performance via structuring.
V. Psyk, P. Kurka, S. Kimme, M. Werner, D. Landgrebe, A. Ebert, M. Schwarzendahl.
In: Proceedings of the 4th International Conference on New Forming Technology – ICNFT2015
www.researchgate.net/publication/281478660_Optimisation_of_component_performance_via_structuring
2015-IUL
Measurement of working coil temperature in electromagnetic forming processes by means of optical frequency domain reflectometry.
S. Gies, A. Langolf, C. Weddeling, A.E.Tekkaya. In: Case Studies in Nondestructive Testing and Evaluation
www.sciencedirect.com/science/article/pii/S2214657115000039
2014-IUL
Thermal loads of working coils in electromagnetic sheet metal forming.
S. Gies, C. Löbbe, C. Weddeling, A.E. Tekkaya. In: Journal of Materials Processing Technology
www.sciencedirect.com/science/article/pii/S0924013614001721
2014-IWU
Electromagnetic joining of hybrid tubes for hydroforming.
V. Psyk, T. Lieber, P. Kurka, W.-G. Drossel. In: Procedia CIRP
www.researchgate.net/publication/275541818_Electromagnetic_Joining_of_Hybrid_Tubes_for_Hydroforming
2014-IWU
A novel tool design strategy for electromagnetic forming.
R. Neugebauer, V. Psyk, C. Scheffler. In: Advanced Materials Research
www.researchgate.net/publication/271975450_A_Novel_Tool_Design_Strategy_for_Electromagnetic_Forming